Case Study: Radiant Barrier Success: Beating the Texas Heat
Introduction:
Homeowners are increasingly turning to innovative solutions for enhanced energy efficiency, precise temperature control, and reduced energy costs. Enduring over 50 scorching days last summer, with temperatures surpassing 100 degrees, one homeowner sought relief. He embarked on a journey to transform his living conditions using ES® RFID Radiant Barrier. In this case study, we’ll explore how this straightforward radiant barrier attic installation transformed his home into a more comfortable, energy-efficient, and temperature-controlled oasis.
Radiant Barrier Installation in South Texas:
Our homeowner, residing in an early 1900’s home in South Texas, purchased 3,000 square feet of ES® Radiant Barrier. Knowing the relentless summer heat that awaited, he embarked on a DIY project. Armed with 48-inch-wide rolls, a stapler, and a strong dose of determination, he stapled the radiant barrier to the rafters of his large, tall attic. To ensure proper ventilation, he left 6-inch gaps at the eaves and near the roof peak, where ridge-vents were in place.
Transformation: Before and After the Radiant Barrier Installation:
Before the radiant barrier installation, the attic was a sweltering space, with temperatures reaching over 120°F, a stark 20°F above the outside air temperatures. Even after the sun went down, the attic remained uncomfortably hot, rarely dropping below 100°F. Undeterred, the homeowner began his project, committing 12 hours of labor during the cooler hours of the early morning, between 4 am and 8 am, when attic temperatures were below 80°F.
By late June, the radiant barrier attic installation was complete, and the results were nothing short of astonishing. Now, even during the day’s peak heat, the attic is only 5° to 10°F warmer than the outside temperature.
Energy Savings and Increased Comfort:
The impact extended beyond temperature control. The homeowner noticed that the air conditioning unit was shutting off earlier and running less frequently. In fact, the house felt cooler despite setting the thermostat to a higher (warmer) temperature. His July electric bill was $50 less than June’s, even though July was predominantly hotter.
With some time for the changes to fully register, the homeowner anticipated even lower bills for August.
Environmental Impact and Lower Energy Consumption:
The homeowner’s commitment to sustainability extended beyond personal comfort and finances. He was proud of his contribution to a reduced carbon footprint. With lower energy consumption for cooling, thanks to the radiant barrier, he was able to align his lifestyle with his commitment to mitigating climate change. The reduction in energy usage not only benefited his wallet but also supported a more sustainable future for the planet.
Conclusion:
This real-world case study from South Texas demonstrates the incredible impact of radiant barrier installation. With determination and ES® RFID Radiant Barrier, a homeowner was able to transform his sweltering attic into a comfortable, energy-efficient space, with lower energy bills.
If you’re seeking relief from extreme heat and high energy bills, this case study is a testament to the effectiveness of radiant barriers. You too can create a more comfortable and cost-effective living environment in even the hottest of climates.
To learn more about the benefits of installing ES® RFID Radiant Barrier Foil in your attic or to purchase your own DIY RFID radiant barrier, call or email us today!